Finden Sie schnell netzwe für Ihr Unternehmen: 1207 Ergebnisse

Leistungs- und Netzanalysator mit hervorragenden Messleistungen und außergewöhnlich guter Bedienungsfreundlichkeit durch intuitive Funktionsweise. Messkanäle: 4U / 4I Eingänge: 5V / 4I Spannung (TRMS AC+DC): 2V bis 1000V Spannungsverhältnis: bis 500 kV Stromverhältnis: Bis 60kA Frequenz: 40Hz bis 69Hz Leistungen: W, VA, var, VAD, PF, DPF, cosφ,tanφ Energien: Wh, varh, VAh , VADh Oberschwingungsmessung: Ja THD: Ja, bis 50.Ordnung, mit Phasenlage Expert-Modus: Ja Flicker (Pst und Plt): Ja Unsymmetrie: Ja Aufzeichnung: Min/ Max-Erfassung Peak: Ja Phasendiagramm: Automatisch Anzeige: TFT-Farbbildschirm 1/4 VGA 320x240, Bilddiagonale 148mm Bildschirm-Kopien: 50 Elektrische Sicherheit: IEC 61010 1000V CAT III / 600V CAT IV Schutzart: IP53/IK08 Schnittstellen: USB Autonomie: bis zu 13 Stunden Stromversorgung: 9,6 V NiMH-Akku oder Netzteil

PRODUCT DESCRIPTION The ExxxR-xx current sensor is dedicated to installations on the bushing of gas insulated switchgear on the secondary energy distribution level. With a slim design, the holding system can be adapted to different kinds of T-connectors. Earthing can be done at the current sensor, through the shielding of the cable, or through the S2 connection inside the IED (intelligent electronic device). PRODUCT ADVANTAGES Passive technology – no active parts are inside, and no power supply is needed Splitable form factor for retrofit installations Easy installation on bushings and cables Correction factors for amplitude and phase inaccuracy improve the sensor class Available as ECO-variant: Initial accuracy class 1, utilizes correction factors for accuracy class improvement IP67 protection if needed

PRODUCT DESCRIPTION The voltage sensors of Type VxxxK-xx are commonly used in asymmetric T-connectors of different manufacturers. T-connectors use a blind plug to secure the T-connector in place after installation. Our sensors can be used instead of the blind plug in the T-connector and serve both to secure the T-connector in place and measure voltage. The sensor has a point for common earth connection, and an output cable for connection with an intelligent electronic device (IED). PRODUCT ADVANTAGES Passive components – No need for power supplies for internal active devices Short-form factor -Sensor is the length of a standard blind plug Robust design – Tightening cap made of solid aluminum, which can withstand an installation torque of up to 50Nm Compatible to asymmetric T-connectors from brands Nexans, Südkabel, Tyco and NKT Wide temperature range

PRODUCT DESCRIPTION The voltage sensors of Type VxxxAQ-xx are commonly used inside elbow connectors. The sensor has a point for common earth connection, and an output cable for connection with an intelligent electronic device (IED). PRODUCT ADVANTAGES Passive components – No need for power supplies for internal active devices Short-form factor – Sensor is the length as the elbow connector Compatible with many different Elbow-connectors Wide temperature range

PRODUCT DESCRIPTION The voltage sensors of Type V360C-xx are commonly used in T-connectors of different manufacturers. T-connectors use a blind plug to secure the T-connector in place after installation. Our sensors can be used instead of the blind plug in the T-connector and serve both to secure the T-connector in place and measure voltage. The sensor has a point for common earth connection, and an output cable for connection with an intelligent electronic device (IED). PRODUCT ADVANTAGES Passive components – No need for power supplies for internal active devices Short-form factor – Sensor is the length of a standard blind plug Robust design – Tightening cap made of solid aluminum, which can withstand an installation torque of up to 50Nm Compatible to T-connectors acc. IEC50181 up to 36kV, Type C connectors Wide temperature range

PRODUCT DESCRIPTION The voltage sensors of Type VxxxB-xx is dedicated to the new T-connector of Euromold/Nexans, called (K)(M)480TB. T-connectors use a blind plug to secure the T-connector in place after installation. Our sensors can be used instead of the blind plug in the T-connector and serve both to secure the T-connector in place and measure voltage. The sensor has a point for common earth connection, and an output cable for connection with an intelligent electronic device (IED) PRODUCT ADVANTAGES Passive components – No need for power supplies for internal active devices Short-form factor – Sensor is the length of a standard blind plug Robust design -Tightening cap made of solid aluminum, which can withstand an installation torque of up to 50Nm Compatible to the new T-connector of Euromold/Nexans, called (K)(M)480TB Wide temperature range

Android Kassensystem mit zwei Bildschirme (15,6" + 11,6") und eingebauten Drucker Android Kasse mit 15.6" und 11.6" Bildschirme, Standfuss mit 80mm Thermodrucker, Qualcomm snapdragon 8 core CPU, 2G RAM, 16G ROM, Android 7.1, Hauptbildschirm 1920x1080, Multi kpazitiv Touch, Wi-Fi, Bluetooth, 5x USB 2.0, 1x RS232/RJ11, 1x RJ12, 1x LAN, 1x Audio 3.5mm, schwarz.