Finden Sie schnell heben für Ihr Unternehmen: 26 Ergebnisse

Woven roving is a reinforcement made from direct, assembled, or texturized fiberglass roving. Woven in a specific pattern for the purpose of providing high strength and lightweight to the end-product. Typically, the glass fiber content is a suitable sizing for multiple resin systems such as unsaturated polyester, vinyl ester and epoxy resins. Woven roving fabrics provide the best solution for raising the glass content of laminates and increasing overall laminate flexural and impact resistance without adding thickness, weight, or other non-reinforcing materials. - kelteks Woven Roving Glass - kelteks Woven Roving Carbon - kelteks Woven Roving Basalt - kelteks Woven Roving Natural - kelteks Woven Roving Hybrid country of origin: Croatia type: Woven Roving weight: 160 - 1700g width: 10 - 380 cm length: up to 1000m variant: kelteks Woven Roving Natural material: Natural fiber

Woven roving is a reinforcement made from direct, assembled, or texturized fiberglass roving. Woven in a specific pattern for the purpose of providing high strength and lightweight to the end-product. Typically, the glass fiber content is a suitable sizing for multiple resin systems such as unsaturated polyester, vinyl ester and epoxy resins. Woven roving fabrics provide the best solution for raising the glass content of laminates and increasing overall laminate flexural and impact resistance without adding thickness, weight, or other non-reinforcing materials. - kelteks Woven Roving Glass - kelteks Woven Roving Carbon - kelteks Woven Roving Basalt - kelteks Woven Roving Natural - kelteks Woven Roving Hybrid country of origin: Croatia type: Woven Roving weight: 160 - 1700g width: 10 - 380 cm length: up to 1000m variant: kelteks Woven Roving Basalt material: Basalt fiber

Woven roving is a reinforcement made from direct, assembled, or texturized fiberglass roving. Woven in a specific pattern for the purpose of providing high strength and lightweight to the end-product. Typically, the glass fiber content is a suitable sizing for multiple resin systems such as unsaturated polyester, vinyl ester and epoxy resins. Woven roving fabrics provide the best solution for raising the glass content of laminates and increasing overall laminate flexural and impact resistance without adding thickness, weight, or other non-reinforcing materials. - kelteks Woven Roving Glass - kelteks Woven Roving Carbon - kelteks Woven Roving Basalt - kelteks Woven Roving Natural - kelteks Woven Roving Hybrid country of origin: Croatia type: Woven Roving weight: 160 - 1700g width: 10 - 380 cm length: up to 1000m variant: kelteks Woven Roving Glass material: Fiberglass

Woven roving is a reinforcement made from direct, assembled, or texturized fiberglass roving. Woven in a specific pattern for the purpose of providing high strength and lightweight to the end-product. Typically, the glass fiber content is a suitable sizing for multiple resin systems such as unsaturated polyester, vinyl ester and epoxy resins. Woven roving fabrics provide the best solution for raising the glass content of laminates and increasing overall laminate flexural and impact resistance without adding thickness, weight, or other non-reinforcing materials. - kelteks Woven Roving Glass - kelteks Woven Roving Carbon - kelteks Woven Roving Basalt - kelteks Woven Roving Natural - kelteks Woven Roving Hybrid country of origin: Croatia type: Woven Roving weight: 160 - 1700g width: 10 - 380 cm length: up to 1000m variant: kelteks Woven Roving Hybrid material: Carbon + Glass fiber

Woven roving is a reinforcement made from direct, assembled, or texturized fiberglass roving. Woven in a specific pattern for the purpose of providing high strength and lightweight to the end-product. Typically, the glass fiber content is a suitable sizing for multiple resin systems such as unsaturated polyester, vinyl ester and epoxy resins. Woven roving fabrics provide the best solution for raising the glass content of laminates and increasing overall laminate flexural and impact resistance without adding thickness, weight, or other non-reinforcing materials. - kelteks Woven Roving Glass - kelteks Woven Roving Carbon - kelteks Woven Roving Basalt - kelteks Woven Roving Natural - kelteks Woven Roving Hybrid country of origin: Croatia type: Woven Roving weight: 160 - 1700g width: 10 - 380 cm length: up to 1000m variant: kelteks Woven Roving Carbon material: Carbon fiber

Unidirectional ( UD ) fabric is one in which main, long, structural fibers are oriented in one direction, held in place by secondary non-structural stitching threads. Structural orientation can be in 0 or 90”. Unidirectional fabrics offer the ability to place fibers in the component exactly where required and in the optimum quantity. ADVANTAGES & CHARACTERISTICS - improved permeability - higher fatigue resistance - less resin consumption - better mechanical properties - improved component build speed - better drappability - higher delamination resistance and impact strength APPLICATIONS - Renewable energy - Marine industry - Shipbuilding - Sport and leisure - Automotive - Aerospace Country of origin: Croatia Industry: Composites Weight: 300g Length: 50-500m Width: 20-150cm

Unidirectional ( UD ) fabric is one in which main, long, structural fibers are oriented in one direction, held in place by secondary non-structural stitching threads. Structural orientation can be in 0 or 90”. Unidirectional fabrics offer the ability to place fibers in the component exactly where required and in the optimum quantity. ADVANTAGES & CHARACTERISTICS - improved permeability - higher fatigue resistance - less resin consumption - better mechanical properties - improved component build speed - better drappability - higher delamination resistance and impact strength APPLICATIONS - Renewable energy - Marine industry - Shipbuilding - Sport and leisure - Automotive - Aerospace Country of origin: Croatia Industry: Composites Weight: 510g Length: 50-500m Width: 20-150cm

Unidirectional ( UD ) fabric is one in which main, long, structural fibers are oriented in one direction, held in place by secondary non-structural stitching threads. Structural orientation can be in 0 or 90”. Unidirectional fabrics offer the ability to place fibers in the component exactly where required and in the optimum quantity. ADVANTAGES & CHARACTERISTICS - improved permeability - higher fatigue resistance - less resin consumption - better mechanical properties - improved component build speed - better drappability - higher delamination resistance and impact strength APPLICATIONS - Renewable energy - Marine industry - Shipbuilding - Sport and leisure - Automotive - Aerospace Country of origin: Croatia Industry: Composites Weight: 480g Length: 50-500m Width: 20-150cm

Multi-layer composite reinforcement We are proud of the fact that we are one of the few companies that use the needling process, and probably the only one that connects layers with needling, gluing or stitching advanced technology. - Excellent Formability - Even resin flow - Greater volume SAVES TIME kelteks FormMat consists of 2 layers of chopped fibers and 1 layer of a veil which saves you the time of work and preparation. Does not wear out during processing which gives a better surface aspect than most of other reinforcements. SUPER VOLUME kelteks FormMat is a premium fabric for sharp-edged parts because high-volume fibers allow optimal coverage of critical areas. MECHANICALLY BONDED kelteks FormMat is mechanically bonded by the needle-loom process, without chemical binding adds volume to reinforcements which means greater part thicknesses can be achieved. MECHANICAL PROPERTIES kelteks FormMat is especially suitable for the manufacture of parts that require mechanical properties such as Construction /building, Wind industry, Automotive /transportation, Marine, Sport & Leisure, Medical equipment, etc. Country of origin: Croatia Industry: Composites Weight: 300/180/300

Multi-layer composite reinforcement We are proud of the fact that we are one of the few companies that use the needling process, and probably the only one that connects layers with needling, gluing or stitching advanced technology. - Excellent Formability - Even resin flow - Greater volume SAVES TIME kelteks FormMat consists of 2 layers of chopped fibers and 1 layer of a veil which saves you the time of work and preparation. Does not wear out during processing which gives a better surface aspect than most of other reinforcements. SUPER VOLUME kelteks FormMat is a premium fabric for sharp-edged parts because high-volume fibers allow optimal coverage of critical areas. MECHANICALLY BONDED kelteks FormMat is mechanically bonded by the needle-loom process, without chemical binding adds volume to reinforcements which means greater part thicknesses can be achieved. MECHANICAL PROPERTIES kelteks FormMat is especially suitable for the manufacture of parts that require mechanical properties such as Construction /building, Wind industry, Automotive /transportation, Marine, Sport & Leisure, Medical equipment, etc. Country of origin: Croatia Industry: Composites Weight: 450/180/450

Multi-layer composite reinforcement We are proud of the fact that we are one of the few companies that use the needling process, and probably the only one that connects layers with needling, gluing or stitching advanced technology. - Excellent Formability - Even resin flow - Greater volume SAVES TIME kelteks FormMat consists of 2 layers of chopped fibers and 1 layer of a veil which saves you the time of work and preparation. Does not wear out during processing which gives a better surface aspect than most of other reinforcements. SUPER VOLUME kelteks FormMat is a premium fabric for sharp-edged parts because high-volume fibers allow optimal coverage of critical areas. MECHANICALLY BONDED kelteks FormMat is mechanically bonded by the needle-loom process, without chemical binding adds volume to reinforcements which means greater part thicknesses can be achieved. MECHANICAL PROPERTIES kelteks FormMat is especially suitable for the manufacture of parts that require mechanical properties such as Construction /building, Wind industry, Automotive /transportation, Marine, Sport & Leisure, Medical equipment, etc. Country of origin: Croatia Industry: Composites Weight: 600/250/600

Multi-layer composite reinforcement We are proud of the fact that we are one of the few companies that use the needling process, and probably the only one that connects layers with needling, gluing or stitching advanced technology. - Excellent Formability - Even resin flow - Greater volume SAVES TIME kelteks FormMat consists of 2 layers of chopped fibers and 1 layer of a veil which saves you the time of work and preparation. Does not wear out during processing which gives a better surface aspect than most of other reinforcements. SUPER VOLUME kelteks FormMat is a premium fabric for sharp-edged parts because high-volume fibers allow optimal coverage of critical areas. MECHANICALLY BONDED kelteks FormMat is mechanically bonded by the needle-loom process, without chemical binding adds volume to reinforcements which means greater part thicknesses can be achieved. MECHANICAL PROPERTIES kelteks FormMat is especially suitable for the manufacture of parts that require mechanical properties such as Construction /building, Wind industry, Automotive /transportation, Marine, Sport & Leisure, Medical equipment, etc. Country of origin: Croatia Industry: Composites Weight: 450/250/450

This high-tech membrane is suitable for full fire protection and stopping as well as smoke, with extended performance for higher temperatures, strength, and flex performance. Building material class A1 (EN 13501-1:2019) A1 guarantees you the highest level of protection A1 is classified as non-combustible to EN 13501-1 reaction to fire. This high-tech membrane is suitable for full fire protection and stopping as well as smoke, with extended performance for higher temperatures, strength, and flex performance. ADVANTAGES & CHARACTERISTICS - Non-flammable fabric made out of glass or basalt - Excellent solar and glare control characteristics - Weatherproof - Maintenance free - Water repellent - UV Protection Wide range application: Our kelteks Protect A1 membrane can simply be installed in any known system and used in all environments. Fire protection: Fire prevention is very important for reducing fire risks in buildings. kelteks Protect A1 membranes do not smoke, flame or burn, and do not contribute to the spread of flames. Invisible but highly effective: kelteks Protect A1 membrane is the secret protector of your family, highly effective and always on guard for their safety Prolonging rescue time: The time factor is for the rescuer as well as for the person to be saved of crucial importance. Using kelteks Protect A1 membranes can prolong the rescue time considerably. Country of origin: Croatia Industry: Composites Temperature: 1000°C

This high-tech membrane is suitable for full fire protection and stopping as well as smoke, with extended performance for higher temperatures, strength, and flex performance. Building material class A1 (EN 13501-1:2019) A1 guarantees you the highest level of protection A1 is classified as non-combustible to EN 13501-1 reaction to fire. This high-tech membrane is suitable for full fire protection and stopping as well as smoke, with extended performance for higher temperatures, strength, and flex performance. ADVANTAGES & CHARACTERISTICS - Non-flammable fabric made out of glass or basalt - Excellent solar and glare control characteristics - Weatherproof - Maintenance free - Water repellent - UV Protection Wide range application: Our kelteks Protect A1 membrane can simply be installed in any known system and used in all environments. Fire protection: Fire prevention is very important for reducing fire risks in buildings. kelteks Protect A1 membranes do not smoke, flame or burn, and do not contribute to the spread of flames. Invisible but highly effective: kelteks Protect A1 membrane is the secret protector of your family, highly effective and always on guard for their safety Prolonging rescue time: The time factor is for the rescuer as well as for the person to be saved of crucial importance. Using kelteks Protect A1 membranes can prolong the rescue time considerably. Country of origin: Croatia Industry: Composites Temperature: 750°C

kelteks Needled Combimat is the combination of woven roving bonded by needling to a mat without chemical binding. This needling method adds volume to fibers thus adding thickness to parts. This product range is particularly recommended for the manufacture with pultrusion process for parts that require great mechanical properties. kelteks Combimat Needled is highly drapable and suitable for laminating corners and edges. Country of origin: Croatia Industry: Composites Weight: 300g+300g Width: 20-350cm Length: 40-200cm

kelteks Needled Combimat is the combination of woven roving bonded by needling to a mat without chemical binding. This needling method adds volume to fibers thus adding thickness to parts. This product range is particularly recommended for the manufacture with pultrusion process for parts that require great mechanical properties. kelteks Combimat Needled is highly drapable and suitable for laminating corners and edges. Country of origin: Croatia Industry: Composites Weight: 240g+200g Width: 20-350cm Length: 40-200cm

These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping increased fiber strength for parts. These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping and makes for increased fiber strength for parts. In practice, these fabrics will be handled in much the same way as woven fabrics. kelteks Combimat Stitched is suitable for larger and thicker laminates and can be cute with the single fibers staying together. - kelteks Combimat Stitched is produced from E-glass or ECR-glass - Combination of woven roven fabric, mats and fleeces - Production time is saved because multiple layers are used - Used for thicker laminates - Used as reinforcement - Gives strength to the finished product - There is no shedding when cutting - Epoxy resin can be used because it does not bond to a powder or emulsion mat Country of origin: Croatia Industry: Composites Weight: 300g+300g Length: 40-200m Width: 20-250cm

These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping increased fiber strength for parts. These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping and makes for increased fiber strength for parts. In practice, these fabrics will be handled in much the same way as woven fabrics. kelteks Combimat Stitched is suitable for larger and thicker laminates and can be cute with the single fibers staying together. - kelteks Combimat Stitched is produced from E-glass or ECR-glass - Combination of woven roven fabric, mats and fleeces - Production time is saved because multiple layers are used - Used for thicker laminates - Used as reinforcement - Gives strength to the finished product - There is no shedding when cutting - Epoxy resin can be used because it does not bond to a powder or emulsion mat Country of origin: Croatia Industry: Composites Weight: 500g+300g Length: 40-200m Width: 20-250cm

These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping increased fiber strength for parts. These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping and makes for increased fiber strength for parts. In practice, these fabrics will be handled in much the same way as woven fabrics. kelteks Combimat Stitched is suitable for larger and thicker laminates and can be cute with the single fibers staying together. - kelteks Combimat Stitched is produced from E-glass or ECR-glass - Combination of woven roven fabric, mats and fleeces - Production time is saved because multiple layers are used - Used for thicker laminates - Used as reinforcement - Gives strength to the finished product - There is no shedding when cutting - Epoxy resin can be used because it does not bond to a powder or emulsion mat Country of origin: Croatia Industry: Composites Weight: 500g+450g Length: 40-200m Width: 20-250cm

These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping increased fiber strength for parts. These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping and makes for increased fiber strength for parts. In practice, these fabrics will be handled in much the same way as woven fabrics. kelteks Combimat Stitched is suitable for larger and thicker laminates and can be cute with the single fibers staying together. - kelteks Combimat Stitched is produced from E-glass or ECR-glass - Combination of woven roven fabric, mats and fleeces - Production time is saved because multiple layers are used - Used for thicker laminates - Used as reinforcement - Gives strength to the finished product - There is no shedding when cutting - Epoxy resin can be used because it does not bond to a powder or emulsion mat Country of origin: Croatia Industry: Composites Weight: 1000g+600g Length: 40-200m Width: 20-250cm

These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping increased fiber strength for parts. These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping and makes for increased fiber strength for parts. In practice, these fabrics will be handled in much the same way as woven fabrics. kelteks Combimat Stitched is suitable for larger and thicker laminates and can be cute with the single fibers staying together. - kelteks Combimat Stitched is produced from E-glass or ECR-glass - Combination of woven roven fabric, mats and fleeces - Production time is saved because multiple layers are used - Used for thicker laminates - Used as reinforcement - Gives strength to the finished product - There is no shedding when cutting - Epoxy resin can be used because it does not bond to a powder or emulsion mat Country of origin: Croatia Industry: Composites Weight: 800g+450g Length: 40-200m Width: 20-250cm

These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping increased fiber strength for parts. These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping and makes for increased fiber strength for parts. In practice, these fabrics will be handled in much the same way as woven fabrics. kelteks Combimat Stitched is suitable for larger and thicker laminates and can be cute with the single fibers staying together. - kelteks Combimat Stitched is produced from E-glass or ECR-glass - Combination of woven roven fabric, mats and fleeces - Production time is saved because multiple layers are used - Used for thicker laminates - Used as reinforcement - Gives strength to the finished product - There is no shedding when cutting - Epoxy resin can be used because it does not bond to a powder or emulsion mat Country of origin: Croatia Industry: Composites Weight: 600g+300g Length: 40-200m Width: 20-250cm

These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping increased fiber strength for parts. These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping and makes for increased fiber strength for parts. In practice, these fabrics will be handled in much the same way as woven fabrics. kelteks Combimat Stitched is suitable for larger and thicker laminates and can be cute with the single fibers staying together. - kelteks Combimat Stitched is produced from E-glass or ECR-glass - Combination of woven roven fabric, mats and fleeces - Production time is saved because multiple layers are used - Used for thicker laminates - Used as reinforcement - Gives strength to the finished product - There is no shedding when cutting - Epoxy resin can be used because it does not bond to a powder or emulsion mat Country of origin: Croatia Industry: Composites Weight: 600g+450g Length: 40-200m Width: 20-250cm

These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping increased fiber strength for parts. These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping and makes for increased fiber strength for parts. In practice, these fabrics will be handled in much the same way as woven fabrics. kelteks Combimat Stitched is suitable for larger and thicker laminates and can be cute with the single fibers staying together. - kelteks Combimat Stitched is produced from E-glass or ECR-glass - Combination of woven roven fabric, mats and fleeces - Production time is saved because multiple layers are used - Used for thicker laminates - Used as reinforcement - Gives strength to the finished product - There is no shedding when cutting - Epoxy resin can be used because it does not bond to a powder or emulsion mat Country of origin: Croatia Industry: Composites Weight: 300g+225g Length: 40-200m Width: 20-250cm

These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping increased fiber strength for parts. These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping and makes for increased fiber strength for parts. In practice, these fabrics will be handled in much the same way as woven fabrics. kelteks Combimat Stitched is suitable for larger and thicker laminates and can be cute with the single fibers staying together. - kelteks Combimat Stitched is produced from E-glass or ECR-glass - Combination of woven roven fabric, mats and fleeces - Production time is saved because multiple layers are used - Used for thicker laminates - Used as reinforcement - Gives strength to the finished product - There is no shedding when cutting - Epoxy resin can be used because it does not bond to a powder or emulsion mat Country of origin: Croatia Industry: Composites Weight: 800g+300g Length: 40-200m Width: 20-250cm

These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping increased fiber strength for parts. These fabrics consist of several layers of fibers in different orientations. Fibers are stitched rather than woven together, which helps to avoid crimping and makes for increased fiber strength for parts. In practice, these fabrics will be handled in much the same way as woven fabrics. kelteks Combimat Stitched is suitable for larger and thicker laminates and can be cute with the single fibers staying together. - kelteks Combimat Stitched is produced from E-glass or ECR-glass - Combination of woven roven fabric, mats and fleeces - Production time is saved because multiple layers are used - Used for thicker laminates - Used as reinforcement - Gives strength to the finished product - There is no shedding when cutting - Epoxy resin can be used because it does not bond to a powder or emulsion mat Country of origin: Croatia Industry: Composites Weight: 900g+300g Length: 40-200m Width: 20-250cm