Finden Sie schnell metall schleifen maschine für Ihr Unternehmen: 14 Ergebnisse

Thermoschrumpfmaschine mit transparenter Haube, Stützplan mm. 500x400x250 h. undmm. 650x550x300 h. HAUBENVERPACKUNGSMASCHINEN - SERIE FP 5540 – FP 7060 Die L-Seal-Hauben-Schrumpfverpackungsmaschine kombiniert das Versiegeln mit dem Schrumpfen in einem Schritt. Der Bediener legt das Produkt zwischen die beiden Lagen Monofaltfolie, bewegt die Verpackung dann in den Siegelbereich und senkt die Haube. Wenn die Schrumpfzeit abgelaufen ist, wird die Haube in die obere Position zurückgebracht und der Bediener kann die fertige Verpackung entnehmen. Die transparente Abdeckung macht den Prozess des Versiegelns, Schneidens und Schrumpfens sichtbar. Farben: je nach Verfügbarkeit dunkelgrau oder orange. Es ist geeignet für PVC-Schrumpffolien mit max. Dicke 30 my und POF-Schrumpffolien mit max. Dicke 19 my. Zwei Modelle sind mit einer Auflagefläche von mm erhältlich. 500x400x250h - mm. 650x550x300h. Die Abmessungen der Auflagefläche sind bei geschlossener Haube zu berücksichtigen. Das Volumen kann nicht vollständig von der Schachtel oder dem zu verpackenden Produkt ausgefüllt werden, da immer Platz für den Durchgang heißer Luft um das Produkt herum gelassen werden muss. Bei der Auswahl der Maschine muss Folgendes berücksichtigt werden: - Die Abmessungen des Kartons (Höhe + Tiefe) dürfen die maximale Breite der auf der Maschine montierten Rolle (je nach Modell) nicht überschreiten, auch unter Berücksichtigung, dass immer mindestens 50 mm Abfall vorhanden sein müssen. - Um kontinuierlich, schnell und reibungslos zu arbeiten, muss um das Produkt herum etwa 5 cm „freie Luft“ berücksichtigt werden, um die Thermo-Retraktion zu erleichtern Abmessungen der Schweißleisten: 550x440/700x600 Haubeninnenvolumen (mm): 500x400x250 h/650x550x300 h Max film roll width (mm): 580/780

The FB1000 is the base line of the Bocedi stretch hood end of the line packaging machines, and a very popular solution. Small, standard, large and extra-large A loyal and trustworthy servant of your end of line packaging process, the stretch hooder FB1000 is available in 4 different versions: small, standard, large and extra-large Capable of hooding up to 2600×1400 mm to load size, the FB1000 can be arranged with up to 3 different sizes of tubular stretch film reels, with an automatic film feeding selection, to offer the flexibility to pack various pallet sizes with one machine only. Maintenance free The machine is practically maintenance free. It is in fact built with top quality, straightforward and consolidated mechanical devices to guarantee very low downtimes and to offer continuity to your production cycle. Easy to operate The FB1000 is so easy to operate that its film unwinding device has a protected patented system for its simplicity. Matches your requirements A multitude of personalised accessories can be installed on the machine to make sure the end result perfectly matches your production packaging requirement and your loads are safe and preserved. The FB1000 hooder is also available in a Hybrid Stretch + Shrink configuration, able to operate with up to 3 mixed stretch or shrink films sizes. The perfect solution for diversified product ranges. Capacity: 70 pallet/hr Maximum pallet size: 1350x1150 mm Minimum pallet size: 600×600 mm PDF-Link: https://www.bocedisrl.com/wp-content/uploads/catalogues/fb1000.pdf

Skinpack-Verpackungsmaschine zum Verpacken von Gegenständen zwischen Karton und transparenter Kunststofffolie. max. Größe mm. 540 x 390. Halbautomatische Skinpack-Verpackungsmaschine zum Verpacken kleiner, mittlerer oder großer Gegenstände zwischen Karton und transparenter Kunststofffolie. Die Skinpack-Verpackung ermöglicht eine unmittelbare Visualisierung des Produkts, die Möglichkeit, in Farbe zu werben und Informationen auf dem Karton zu melden, die Praktikabilität der Verpackung, die an den Ausstellern aufgehängt werden kann. Der Kartonträger kann durch eine Luftpolsterfolie (Blasenpolyethylen) ersetzt werden. CE-Normmaschine mit Niederspannungssteuerung, Schaltschrank mit Siemens-SPS, Sicherheitsmodul (Pilz), Unfallverhütungsschutz am Arbeitsbereich mit Sicherheitssensor (die Abwärtsbewegung des Rahmens erfolgt nur bei geschlossener Schutzeinrichtung, die Aufwärtsbewegung erfolgt durch einen doppelte Kontrolle). Die Verpackungsmaschine Mod. FP-390 hat einen begrenzten Energieverbrauch, da die Widerstände nur zum Zeitpunkt des Verpackens aktiviert werden (bei den anderen Skinpacks sind die Widerstände immer eingeschaltet) und es besteht keine Gefahr einer Überhitzung. Größen der Arbeitsfläche: mm. 540 x 390 Max. Pakethöhe: mm. 140 Brauchbarer Film: PVC - SURLYN und PE Breite der Folienrolle: mm. 450

Pneumatische Ösmaschine mit Einzelkopf für Ösen 9 mm, 7 mm, Typ 051 und Typ 050. Lackiert und INOX PNEUMATISCHE ÖSTENMASCHINE MIT EINEM KOPF, automatischer Zuführung, Rahmen und Ständer aus Gusseisen. Geeignet für Anwendungen mit hohem Volumen und wenn eine Öse erforderlich ist. Ideal zum automatischen Anbringen von Garantiesiegeln in der Kartonindustrie, Bank, Post und in vielen anderen Bereichen. Es wird insbesondere in der Lebensmittelindustrie zum Versiegeln und gleichzeitigen Aufbringen einer bedruckten Karte auf Plastiktüten verwendet. Das Standardmodell ist mit einem an der Stützstruktur montierten Zylinder ausgestattet. Auf Anfrage ist es möglich, das Modell mit einem direkt am Kopf der Ösmaschine montierten Zylinder zu haben. Rohrrahmen: mm. 25x25 Platte aus lackiertem Stahl: mm. 360 x 500 Höhe mit Tisch: mm. 1400 Nützliche Tiefe: mm. 125 Ösendurchmesser: mm. 9

The full hood-shrink cycle in one module. Bocedi FTB419 is the complete machine which allows pallet hooding and hood shrinking all in one place. Space saving It is a perfect space saving piece of equipment that significantly reduces its footprint, having the combined hooding/shrinking process in one machine only. The pallet is automatically detected for the film feed to prepare the right film size, the plastic hood is tailored cut and sealed to reduce the amount of plastic used. Recycled hot air system The shrinking process is made through a stainless-steel ring which uses a patented system of controlled recycled hot air to evenly and gently heat up the plastic on the 4 sides around the load; no direct contact with flames does in fact preserve the film elasticity and resistance. Advanced technology The FTB419 works with any type of low-pressure gas. It is also available in an electrical version. Bocedi machines are known to be flexible and fast. The FTB419 fits perfectly in the company standards. It can in fact be configurated with up to 6 different film sizes and it can operate more than 100 pallets/hr. Capacity: 100 pallet/hr Maximum pallet size: On request Minimum pallet size: 600×800 mm PDF-Link: https://www.bocedisrl.com/wp-content/uploads/catalogues/shrink-hood-machines.pdf

Bocedi STARSTRETCH FB4.0 is the latest solution for the end of the line packaging systems. Innovative The stretch hooder is connected directly to your business software with a new SMART user-friendly HMI. The machine offers several up-to-date options such as remote protected access profiles, hooding control cycle all in one screen, in time diagnosis, backup on portable drives and so much more. And if you are new to the packaging industry Starstretch FB4.0 can help you out, just provide some data like load dimensions and film size and the stretch hooder will automatically elaborate the packaging programs for your load. 280 pallet per hour Capable of hooding more than 280 pallet an hour, the hooder can welcome up to 3 different stretch film sizes with automatic film selection, guaranteeing an excellent balance between speed and flexibility. Fully customizable With the innovative patented head lowering system, STARSTRETCH FB4.0 offers to perform all maintenance services and operations at floor level. You can choose to lower the cutting edge and the sealing bar OR the film change station separately. Capacity: 280 pallet/hr Maximum pallet size: On request Minimum pallet size: 400×400 mm PDF-Link: https://www.bocedisrl.com/wp-content/uploads/catalogues/fb4-0.pdf

The FB1000 is the base line of the Bocedi stretch hood end of the line packaging machines, and a very popular solution. Small, standard, large and extra-large A loyal and trustworthy servant of your end of line packaging process, the stretch hooder FB1000 is available in 4 different versions: small, standard, large and extra-large Capable of hooding up to 2600×1400 mm to load size, the FB1000 can be arranged with up to 3 different sizes of tubular stretch film reels, with an automatic film feeding selection, to offer the flexibility to pack various pallet sizes with one machine only. Maintenance free The machine is practically maintenance free. It is in fact built with top quality, straightforward and consolidated mechanical devices to guarantee very low downtimes and to offer continuity to your production cycle. Easy to operate The FB1000 is so easy to operate that its film unwinding device has a protected patented system for its simplicity. Matches your requirements A multitude of personalised accessories can be installed on the machine to make sure the end result perfectly matches your production packaging requirement and your loads are safe and preserved. The FB1000 hooder is also available in a Hybrid Stretch + Shrink configuration, able to operate with up to 3 mixed stretch or shrink films sizes. The perfect solution for diversified product ranges. Capacity: 70 pallet/hr Maximum pallet size: 2600x1400 mm Minimum pallet size: 600×600 mm PDF-Link: https://www.bocedisrl.com/wp-content/uploads/catalogues/fb1000.pdf

The FB1000 is the base line of the Bocedi stretch hood end of the line packaging machines, and a very popular solution. Small, standard, large and extra-large A loyal and trustworthy servant of your end of line packaging process, the stretch hooder FB1000 is available in 4 different versions: small, standard, large and extra-large Capable of hooding up to 2600×1400 mm to load size, the FB1000 can be arranged with up to 3 different sizes of tubular stretch film reels, with an automatic film feeding selection, to offer the flexibility to pack various pallet sizes with one machine only. Maintenance free The machine is practically maintenance free. It is in fact built with top quality, straightforward and consolidated mechanical devices to guarantee very low downtimes and to offer continuity to your production cycle. Easy to operate The FB1000 is so easy to operate that its film unwinding device has a protected patented system for its simplicity. Matches your requirements A multitude of personalised accessories can be installed on the machine to make sure the end result perfectly matches your production packaging requirement and your loads are safe and preserved. The FB1000 hooder is also available in a Hybrid Stretch + Shrink configuration, able to operate with up to 3 mixed stretch or shrink films sizes. The perfect solution for diversified product ranges. Capacity: 70 pallet/hr Maximum pallet size: 1800x1400 mm Minimum pallet size: 600×600 mm PDF-Link: https://www.bocedisrl.com/wp-content/uploads/catalogues/fb1000.pdf

The FB1000 is the base line of the Bocedi stretch hood end of the line packaging machines, and a very popular solution. Small, standard, large and extra-large A loyal and trustworthy servant of your end of line packaging process, the stretch hooder FB1000 is available in 4 different versions: small, standard, large and extra-large Capable of hooding up to 2600×1400 mm to load size, the FB1000 can be arranged with up to 3 different sizes of tubular stretch film reels, with an automatic film feeding selection, to offer the flexibility to pack various pallet sizes with one machine only. Maintenance free The machine is practically maintenance free. It is in fact built with top quality, straightforward and consolidated mechanical devices to guarantee very low downtimes and to offer continuity to your production cycle. Easy to operate The FB1000 is so easy to operate that its film unwinding device has a protected patented system for its simplicity. Matches your requirements A multitude of personalised accessories can be installed on the machine to make sure the end result perfectly matches your production packaging requirement and your loads are safe and preserved. The FB1000 hooder is also available in a Hybrid Stretch + Shrink configuration, able to operate with up to 3 mixed stretch or shrink films sizes. The perfect solution for diversified product ranges. Capacity: 70 pallet/hr Maximum pallet size: 950x800 mm Minimum pallet size: 600×600 mm PDF-Link: https://www.bocedisrl.com/wp-content/uploads/catalogues/fb1000.pdf

The FB3000 stretch hooder is designed to offer flexible packaging standards. With the integrated cartesian system to stretch the film, the hooder can operate with a large variety of different load shapes and sizes. The FB3000 has the innovative patented head lowering system that allows to perform all maintenance services and operations at floor level. You can easily choose to lower the cutting edge and the sealing bar OR the film change station separately to allow the operator to perform all the necessary action within maximum safety. With a latest up to date film opening device the hooder can work with any stretch film type or thickness from 20 to 200 micron, printed or not. The FB3000 output capacity can reach the 80 loads per hour. Thanks to the integrated load dimension reader the machine will automatically tailor each hood for each load. Easy to operate and with little maintenance requirement the FB3000 is designed with pneumatic movements to keep the machine as simple as possible. With the many hood finishing achievable with the stretch hooder, do not just pack the load, pack it the way you want it. Capacity: 80 pallet/hr Maximum pallet size: 2600x1400 mm Minimum pallet size: 600×600 mm

The FB3000 stretch hooder is designed to offer flexible packaging standards. With the integrated cartesian system to stretch the film, the hooder can operate with a large variety of different load shapes and sizes. The FB3000 has the innovative patented head lowering system that allows to perform all maintenance services and operations at floor level. You can easily choose to lower the cutting edge and the sealing bar OR the film change station separately to allow the operator to perform all the necessary action within maximum safety. With a latest up to date film opening device the hooder can work with any stretch film type or thickness from 20 to 200 micron, printed or not. The FB3000 output capacity can reach the 80 loads per hour. Thanks to the integrated load dimension reader the machine will automatically tailor each hood for each load. Easy to operate and with little maintenance requirement the FB3000 is designed with pneumatic movements to keep the machine as simple as possible. With the many hood finishing achievable with the stretch hooder, do not just pack the load, pack it the way you want it. Capacity: 80 pallet/hr Maximum pallet size: 1350x1150 mm Minimum pallet size: 600×600 mm

The FB3000 stretch hooder is designed to offer flexible packaging standards. With the integrated cartesian system to stretch the film, the hooder can operate with a large variety of different load shapes and sizes. The FB3000 has the innovative patented head lowering system that allows to perform all maintenance services and operations at floor level. You can easily choose to lower the cutting edge and the sealing bar OR the film change station separately to allow the operator to perform all the necessary action within maximum safety. With a latest up to date film opening device the hooder can work with any stretch film type or thickness from 20 to 200 micron, printed or not. The FB3000 output capacity can reach the 80 loads per hour. Thanks to the integrated load dimension reader the machine will automatically tailor each hood for each load. Easy to operate and with little maintenance requirement the FB3000 is designed with pneumatic movements to keep the machine as simple as possible. With the many hood finishing achievable with the stretch hooder, do not just pack the load, pack it the way you want it. Capacity: 80 pallet/hr Maximum pallet size: 950x800 mm Minimum pallet size: 600×600 mm

The FB3000 stretch hooder is designed to offer flexible packaging standards. With the integrated cartesian system to stretch the film, the hooder can operate with a large variety of different load shapes and sizes. The FB3000 has the innovative patented head lowering system that allows to perform all maintenance services and operations at floor level. You can easily choose to lower the cutting edge and the sealing bar OR the film change station separately to allow the operator to perform all the necessary action within maximum safety. With a latest up to date film opening device the hooder can work with any stretch film type or thickness from 20 to 200 micron, printed or not. The FB3000 output capacity can reach the 80 loads per hour. Thanks to the integrated load dimension reader the machine will automatically tailor each hood for each load. Easy to operate and with little maintenance requirement the FB3000 is designed with pneumatic movements to keep the machine as simple as possible. With the many hood finishing achievable with the stretch hooder, do not just pack the load, pack it the way you want it. Capacity: 80 pallet/hr Maximum pallet size: 1800x1400 mm Minimum pallet size: 600×600 mm

Halbautomatische Winkelverpackungsmaschinen mit manuellem oder automatischem Schließen der Schweißleiste und motorisiertem Band, das mit dem Produkt beladen wird. Sie kann mit einem Schrumpftunnel kom Winkelverpackungsmaschinen mit manuellem oder automatischem Schließen der Siegelschiene und motorisiertem Produktentladeband. Sie können mit einem Retraktionstunnel kombiniert werden. MERKMALE: - Versiegelungsklinge aus NI-CR mit Antihaftbeschichtung - Kontrolle der Schweißzeit zur Vermeidung von Überhitzung - Förderband per Handrad höhenverstellbar - Doppelmagnet für hohe Schließkraft - Rollenhalter gleitet auf Kugellagerführungen, Nutzbreite mm 550 - Gasfedergesteuerter Rücklauf der Siegelschiene (für manuelle Version 5045 L) - Pneumatische Vorrichtung (Druckluft) zum Schließen und Öffnen der Siegelschiene (für halbautomatische Version BSL 5045 LA) Das Modell BSL 5045 LA ist mit einer selbsthaltenden Doppelsteuerung ausgestattet (die beiden Tasten müssen gedrückt gehalten werden, bis die Stangen vollständig geschlossen sind). Max. Dichtungsgröße: 500x450 mm Stützplangröße (L×B): 450x400 mm H max. Produkt: 250 mm