Finden Sie schnell filted für Ihr Unternehmen: 8 Ergebnisse

1. Bereiten Sie Luft für alle Arten von Druckluftwerkzeugen und -geräten vor 2. Druckluft mit Filtern zur Entfernung von festen Partikeln und Kondensat 3. Reglerventile halten den Luftdruck über einen breiten Durchflussbereich genau 4. Schützen Sie Ihre pneumatischen Werkzeuge für eine längere Lebensdauer

ESSD / ESSDS Filter Drier Series are hermetic Filter Drier in compacted bead style for use on liquid line. Moisture removal formula, is prepared as %80 Molecular Sieve and %20 Activated Alumina targeting maximum moisture and acid removal from the system. For CFC and HCFC refrigerants with mineral and alkyl benzene oils, ESSD / ESSDS Series are recommended. At the same time they are compatible with Group I (Ashrae 34 A2L, A2) and Group II (Ashrae 34 A1) refrigerants and blends. Properties: – ESSD Series have 45° flare type connection, – ESSDS Series have solder type connection, – Extremely high water adsorption capacity compared to others brands, – High acid adsorption / preventation capacity, – Ability to filtration of unwanted particals more then size of 20 microns by the grade filtration, – High crush and abrasion strength even after full capacity, – Working temperature is between -40 °C, +120 °C, – Maximum working pressure is 45 bar, – Minimum flow resistance.

1. Die Serie HFC besteht aus Filter & Regler und Schmiergerät, jede Einheit kann separat bestellt werden. 2. Der Luftfilter mit Wasserabscheider reinigt die Druckluft von flüssigem Öl, Kondensat und Schmutzpartikeln. Für spezielle Anwendungen kann das Standard-40um-Filterelement leicht durch ein 5um-Filterelement ersetzt werden. 3. Der Regler hält den konstanten Betriebsdruck trotz Schwankungen im Leitungsdruck und der Menge an verbrauchter Luft. 4. Der proportionale Schmiergerät fügt der gefilterten Luft eine regulierte Menge Öl hinzu, der Ölnebelgehalt ist proportional zum Durchfluss und Öl kann während des Betriebs hinzugefügt werden. Die Öltropfgeschwindigkeit wird durch die verstellbare Schraube gesteuert. Normalerweise sind 1 bis 12 Tropfen /1000 L Luft ausreichend. 5. Verschiedene Gewindearten können gemäß den Anforderungen der Kunden angeboten werden, z.B.: PT, NPT usw.

ESSDTM / ESSDTMS Filter Drier Series are hermetic Filter Drier in compacted solid core for use on liquid line. Moisture removal formula, is prepared as %100 Molecular Sieve targeting maximum moisture removal and acid formation prevention. For Group I (Ashrae 34 A2L, A2) and Group II (Ashrae 34 A1) refrigerants and blends, POE/PAG oils and additives ESSDTM / ESSDTMS Series are recommended. ESSDTM Series have 45° flare type connection, – ESSDTMS Series have solder type connection, – Extremely high water adsorption capacity compared to others brands, – High acid preventation capacity, – POE oils and additives compatibility, – Ability to filtration of unwanted particals more then size of 20 microns by the grade filtration, – High crush and abrasion strength even after full capacity, – Working temperature is between -40 °C, +120 °C, – Maximum working pressure is 45 bar, – Minimum flow resistance.

ESSBFS / ESSBFCS Suction Line Filter Drier Series are hermetic Filter Drier in compacted bead style for use on suction line. ESSBFS Series is designed for CFC and HCFC refrigerants with mineral and alkyl benzene oils. At the same time they are compatible with Group I (Ashrae 34 A2L, A2) and Group II (Ashrae 34 A1) refrigerants and blends. ESSBFCS Series are the Suction Line Filter Driers for the systems using CO2 (R-744) as a refrigerant. Moisture removal formula, is prepared as %70 Molecular Sieve and %30 Activated Alumina targeting maximum moisture and acid removal from the system. ESSBFS / ESSBFCS are designed for the removal of the moisture and acidity and / or removal of the acidity formed after the burn-out of the compressor. ESSBFS / ESSBFCS Series have solder type connection, – Extremely high water adsorption capacity compared to others brands, – High acid adsorption / preventation capacity, – 1/4″ Schrader unions on the inlet and outlet, providing easy and fast tracking,

ESSAC / ESSOR / ESSOD Filter Drier series are hermetic Filter Drier in compacted bead style for use on liquid line. Moisture removal formula, is prepared as %100 Molecular Sieve targeting maximum moisture and acid removal from the system. ESSACTM / ESSORTM / ESSODTM Filter Drier Series are hermetic Filter Drier in compacted solid core for use on liquid line. Moisture removal formula, is prepared as %100 Molecular Sieve targeting maximum moisture removal and acid formation prevention. These series are specially produced for vehicle type refrigeration and air conditioning systems. The unique design enhances the performance of the Filter Drier in commercial type vehicle refrigeration and air conditioning even if there is variable engine revolution problem. Compatible with every refrigerant used in commercial vehicle refrigeration and air conditioning, including R1234yf.

ESSDC / ESSDCS / ESSDMC / ESSDMCS Filter Drier Series are hermetic Filter Drier in compacted bead style for use on liquid line. ESSDTMC / ESSDTMCS Filter Drier Series are hermetic Filter Drier in compacted solid core for use on liquid line. ESSDC / ESSDCS / ESSDMC / ESSDMCS Series are designed for use with CO2 (R-744) in “Subcritical Zone”. Moisture removal formula, is prepared as %100 Molecular Sieve in ESSDMC, ESSDMCS, ESSDTMC and ESSDTMCS Series, %80 Molecular Sieve and %20 Activated Alumina in ESSDC and ESSDCS Series targeting maximum moisture removal and acid formation prevention. ESSDMC, ESSDMCS, ESSDTMC and ESSDTMCS Series are compatible with POE oils and additives. Properties: – ESSDC / ESSDMC / ESSDTMC Series have 45° flare type connection, – ESSDCS / ESSDMCS / ESSDTMCS Series have solder type connection, – Extremely high water adsorption capacity compared to others brands, – High acid preventation capacity

ESSDM / ESSDMS Filter Drier Series are hermetic Filter Drier in compacted bead style for use on liquid line. Moisture removal formula, is prepared as %100 Molecular Sieve targeting maximum moisture removal and acid formation prevention. For Group I (Ashrae 34 A2L, A2) ve Group II (Ashrae 34 A1) and POE/PAG oils and additives ESSDM / ESSDMS Series are recommended. ESSDM Series have 45° flare type connection, – ESSDMS Series have solder type connection, – Extremely high water adsorption capacity compared to others brands, – High acid preventation capacity, – POE oils and additives compatibility, – Ability to filtration of unwanted particals more then size of 20 microns by the grade filtration, – High crush and abrasion strength even after full capacity, – Working temperature is between -40 °C, +120 °C, – Maximum working pressure is 45 bar, – Minimum flow resistance.