Finden Sie schnell entsp32 für Ihr Unternehmen: 3 Ergebnisse

Clear and simple user interface 3-Φ current output 0-1200A per phase output current True RMS digital metering Memory ammeter Multi-function timing system Auxiliary metering input Large back-lit liquid crystal display Thermal and over-current protection Portable on battery powered stair climbing trolleys Maximum power output 13kVA The 1200A-3PH is a three phase injection system providing commissioning and maintenance engineers with a flexible system for testing protective systems. It has an easy to understand panel layout and a simple user interface. The status of every function can be seen at a glance, and there are no complex menus to navigate. Each loading unit has two output taps to allow for a range of load impedance. Each phase is isolated and can be configured to either give a maximum of 1200A at 3.5V or 600A at 7V. Three true RMS metering ranges are provided, allowing the full scale of the meter and trip level to be set independently of the selected output. An auxiliary metering input is provided and can measure voltage, current, frequency, and the phase between any of the current outputs and an external voltage or current. The timing system is very flexible without compromising ease of use, allowing trip times, reset times and reclose times to be quickly measured to a high degree of accuracy. Two independently isolated contact inputs are provided, and the timing system may also be used as a stand-alone timer. The 1200A-3PH can be use to test many single and three phase devices including: Over current relays Under current relays IDMT relays Auto-reclosers Time delay relays Earth fault relays Miniature circuit breakers Power relays Tripping relays Thermal relays

Das Zahnradwerk Pritzwalk in Brandenburg fertig seit 1969 Verzahnungsartikel und beliefert den Bereich Maschinenbau zuverlässig mit Zahnwellen, Zahnräder und Großzahnräder sowie Zahnkränze & Flansche. Über 50 Jahre Erfahrungen kann das Unternehmen ZWP in der Herstellung von Verzahnungsartikel vorweisen. Unsere renommierten Kunden kommen dabei aus folgenden Branchen: Bahn, Windkraft, Kranherstellung, Industriegetriebe, Bergbau und Sondermaschinenbau. ZWP fertigt als einer der größten unabhängigen Lohnhersteller Deutschlands folgende Produkte: Zahnräder / Planetenräder für Planetengetriebe: innen- und außenverzahnt gehärtet und geschliffen Modul 2 – 50 mm Durchmesser 100 – 2.000 mm Verzahnte Wellen / Sonnenwellen: innen- und außenverzahnt gehärtet und geschliffen Modul 1 – 50 mm Durchmesser 50 – 500 mm Länge bis 1.500 mm Innenverzahnte Zahnkränze: gehärtet und geschliffen Modul bis 20 mm Durchmesser 100 bis 1.800mm Zu unseren Kunden gehören renommierte und bekannte Unternehmen. Referenzen zu Ihrer Branche auf Anfrage. Wir fertigen nach Kundenzeichnung und besitzen eine eigene Härterei. Diese spart Zeit und Kosten bei der Herstellung. Aber auch eine Zusammenarbeit besteht für andere Härtungsverfahren wie Gasnitrierung oder Einzelzahninduktionshärten mit Experten ihres Fachs. Wir freuen uns auf Ihre Kontaktaufnahme.

Primary injection up to 750A 4V output* 16V 40A output for secondary injection True RMS memory ammeter with single cycle capture Multi-function timing system Large back-lit liquid crystal display Thermal and over-current protection Automatic switch-off at end of test Compact and portable Automatic mains voltage selection* T&R Test Equipment is a market leader in the field of current injection equipment. The range includes secondary injection units with 100A output capability up to 6000A primary injection systems. All have true RMS metering, a flexible timing system, and an easy to understand user interface. The 750ADM-H mk3 is a compact, rugged primary current injection system with a 750A output capability. The 750ADM-H mk3 has a maximum no load output voltage of 5V. The unit is ideally suited to all low power primary injection tasks requiring up to 750A for short periods. Where higher currents and powers are required for primary injection, 11kVA and 20kVA primary injection systems are also available. The PCU1-SP and CU-PS systems have separate control units, allowing a wide range of load conditions to be met by different loading units. The unit has two outputs, allowing injection of currents as low as a few hundred milliamps and up to 750A. Voltages up to 16V are available on the 40A output, allowing higher impedance trips to be tested. Four true RMS metering ranges are provided, allowing the full scale of the meter and trip level to be set independently of the selected output. The metering has a capture time of less than 20ms, allowing the RMS of a single cycle to be accurately measured. Industry standard connectors are used on all inputs and outputs for convenience, reliability and safety. The 750ADM-H mk3 is comprehensively protected by electronic overcurrent and thermal trips. The timing system is very flexible without compromising ease of use, allowing trip times, reset times and reclose times to be quickly measured to a high degree of accuracy. Two contact inputs are provided, each of which may be trigged by a volt-free contact or a DC voltage. The contact inputs auto-sense for normally open or normally closed contacts. The 750ADM-H mk3 can be used to test many devices including: Circuit breakers Primary injection of over-current relays Auto-reclosers MCB’s CT ratio (with external meter for secondary current)