Finden Sie schnell chemiekalien für Ihr Unternehmen: 34 Ergebnisse

Grundmaterial: Fe/Cu/Ms/Niro Durch eine alkalische Lösung bildet sich auf dem Grundmaterial eine schwarze Schicht aus Oxiden und Sulfiden aus. Die Oberfläche wird schwarz eingefärbt, leicht matt und daher reflexionsmindernd. Brünieren bietet mäßigen Korrosionsschutz (Rostgefahr). Brünierungen benötigen deshalb ständige Pflege (einölen).

Chemisch Nickel (ISO 4527): Automat Gestell: Max. Abmessung (mm): 1100 x 450 x 650 Trommel Grundmaterial: Fe/Cu/Ms/Al Schmelzpunkt: ca. 890 C Härte: ca. 530-580 HV Härte (wärmebehandelt): ca. 1000HV Dichte: 8,0-8,4 g/cm² Phosphorgehalt: 7-13 % Elektrischer Widerstand: 40-70 (µOhm/cm) Lötbarkeit: gut Druckeigenspannung 14 – 35 N/mm2, Druckspannung Allgemeines: Chemisch Nickel ist ein Verfahren der autokatalytischen oder außenstromlosen Nickel-Phosphor-Legierungsabscheidung. Die zu beschichtenden Werkstücke werden in das Chemisch Nickelbad getaucht in dem sich neben den Nickelionen Reduktionsmittel und andere Chemikalien befinden. Das Besondere beim Chemisch Nickel ist, dass die abgeschiedenen Schichten eine homogene Schichtdicke (Konturengetreu!) am gesamten Werkstück aufweisen. Also auch in Bohrungen, Passungen und Rohrinnenseite ohne Kantenaufbau. Die geforderte Schichtdicke richtet sich nach den Korrosionsanforderungen im verbauten Zustand. Möglichkeit von 5-50µ Schichten. Durch eine Wärmebehandlung kann die Härte auf bis zu 950 HV angehoben werden. Anwendungsgebiete: • Automobilindustrie (Antriebswellen, Einspritzpumpenteile, Kupplungselemente usw.) • Maschinenbau (Zahnräder, Wellen, Verschraubungen usw.) • Papierindustrie ( Walzen, Zylinder, Umlenkvorrichtungen) • und viele andere Einsatzmöglichkeiten! Vorteile: Korrosionsfestigkeit, gleichmäßige Schichtverteilung, enge Schichttolleranzen, verschleißfest.

adhesive for the paper industry Product description: • AMITROPASTE P 26 is a cold water soluble corn starch. • Chemical base: corn starch • Solubility: soluble in cold water • Appearance: white to slightly yellowish powder • Odour: specific

for concrete applications Product description: • AMITROLIT 8865 is a cold water soluble starch-ether based on maize starch. • Appearance: white-yellowish powder • Flavour: specific, pure Application: • AMITROLIT 8865 is a special starch, which is used for the dry spraying method and wet spraying method. The starch will be used to reduce the amount of rebound and dust. If there is the possibility to pre-moisturize the dry shotcrete AMITROLIT 8865 can develop its quality better.

for cementitious systems Product description: • AMITROLIT 8860 is a cold water soluble starch-ether based on maize starch. • Appearance: white-yellowish powder • Flavour: specific, pure Application: • AMITROLIT 8860 is a special starch, which is mainly used in the building - chemistry. • Even under high-alkaline and high-calcium circumstances AMITROLIT 8860 is in a position to control the consistency. Due to the use of AMITROLIT 8860 it is guaranteed that the consistency does not depend on the quantity of water in a wide range.

coating starch for paper production Product description: • Chemical base: corn starch • Soluble in cold water • Appearance: white powder • Odour: specific, pure Applications: • AMITROCOAT 8903 was developed for the usage in High-Solids coating formulations. When applied correctly there are no negative consequences regarding runability or printability. AMITROCOAT 8903 enables to reduce parts of latex in the coating formulations.

thermoplastic starch Product description: Thermoplastic starch AMITROPLAST® 8940 is made from renewable, non-genetically-modified raw materials and is furthermore degradable. • Base: corn starch • Appearance: slightly yellowish granules • Odor: characteristic Application: • AMITROPLAST® 8940 is a blend component made from modified thermoplastic starch, which is specifically tailored to the requirements of extrusion and film extrusion. • AMITROPLAST® 8940 is compoundable with other plastics in order to obtain materials with mechanical and physical properties appropriate for specific applications.

for dispersion systems Product description: • Base: potato starch • Modification: starch ether • Solubility: cold water soluble starch • Appearance: white-yellowish powder • Odour: specific, pure Application: • AMITROPAINT 8250 is used as thickener in aqueous paint systems in combination with high-viscosity celluloses. This starch derivative can be stirred directly in the swelled cellulose or best directly before the binder in the dispersed paint paste.

sizing starch for the textile industry, hot water soluble Product description: • Base: potato starch • Modification: starch ether – propoxylated • Solubility: hot water soluble • Appearance: white powder • Odour: neutral Application: • SOLAMYL 9630 is used in the textile industry as a sizing agent for cotton, rayon, linen, blended yarns and yarns made from synthetic fibres.

sizing starch for the textile industry, hot water soluble Product description: • Base: potato starch • Modification: starch ether – propoxylated • Solubility: hot water soluble • Appearance: white powder • Odour: neutral Application: • SOLAMYL 9570 is used in the textile industry as a sizing agent for cotton, rayon, linen, blended yarns and yarns made from synthetic fibres. • We confirm that SOLAMYL 9570 can be used for the processing of textiles that meet the requirements of „eko-Tex Standard 100" provided that the product is applied in accordance with our recommendations and/or industry standards for chemical applications throughout the textile industry.

dextrins for the paper industry Product description: • AMITROCORE P 20.904 is a starch based adhesive for the core production • Raw material: potato starch Application: • AMITROCORE P 20.904 concentrated pastes which are very tacky and which dry rapidly when applied as a thin film. • AMITROCORE P 20.904 is mainly used in the production of tacky, quick-setting adhesives primarily for glueing paper products: for tube winding. Furthermore for carton and case sealing and flat gumming and envelope seams, gummed tapes.

for cementitious and gypsum systems Product description: • AMITROLIT 8873 is a cold water soluble starch-ether based on potato. • Appearance: white-yellowish powder • Odour: pure, specific Application: • AMITROLIT 8873 is a special starch that is mainly used in the building-chemistry. • AMITROLIT 8873 has a behaviour that increases the consistency. In respective combination with cellulose-ethers optimal settings of non-sag properties, working properties, water retention are possible. AMITROLIT 8873 is used in all systems which are based on gypsum, cement and lime.

for cementitious and gypsum systems Product description: • AMITROLIT 8874 is a cold water soluble starch-ether based on potato. • Appearance: white-yellowish powder • Odour: pure, specific Application: • AMITROLIT 8874 is a special starch that is mainly used in the building-chemistry. • AMITROLIT 8874 has a behaviour that increases the consistency. In respective combination with cellulose-ethers optimal settings of non-sag properties, working properties, water retention are possible. AMITROLIT 8874 is used in all systems which are based on gypsum, cement and lime.

for cementitious and gypsum systems Product description: • AMITROLIT 8882 is a cold water soluble starch-ether based on potato starch. • Appearance: white-yellowish powder • Flavour: specific, pure Application: • AMITROLIT 8882 is a special starch, which is mainly used in the building - chemistry. • Using AMITROLIT 8882 gives a good stability to building materials even if the dosage is very low.

for cementitious systems Product description: • AMITROLIT 8869 is a cold water soluble starch-ether based on waxy maize starch. • Appearance: white-yellowish powder • Flavour: specific, pure Application: • AMITROLIT 8869 is a special starch, which is mainly used in the building - chemistry. • Even under high-alkaline and high-calcium circumstances AMITROLIT 8869 is in a position to control the consistency. Due to the use of AMITROLIT 8869 it is guaranteed that the consistency does not depend on the quantity of water in a wide range.

modified starch for the paper industry Product description: • Base: modified waxy maize starch • Solubility: cold water soluble • Appearance: slightly beige powder • Odour: pure, specific Application: • AMITROLIT 8966 is used in recipes for label glues. • AMITROLIT 8966 is in accordance with FDA 175.105 and 172.892.

finishing straches for the textile industry, hot water soluble Product description: • Chemical base: corn starch • Modification: cationic, degraded • Appearance: white to yellowish, fine powder • Odour: specific, slightly aminous Application: • CATIONAMYL 8424 is used as sizing agent for glass fibres.

sizing starch for the textile industry, cold water soluble Product description: • Base: potato starch • Solubility: cold water soluble • Appearance: cream coloured granules Application: •Finishing for fabrics made of natural, man made or mineral fibres.

sizing starch for the textile industry, cold water soluble Product description: • Base: potato starch • Modification: starch ether – carboxymethylated • Solubility: cold water soluble • Appearance: cream coloured granules Application: • AMITROLIT 8914 is used in the textile industry as a sizing agent for cotton, rayon, linen, blended yarns and yarns made from synthetic fibres.

finishing starch for the textile industry, cold water soluble Product description: • Base: potato starch • Modification: starch ester – phosphated • Solubility: cold water soluble • Appearance: yellowish, granular powder Applications: •AMITROLIT 8713 is used in the textile industry as a filler and as a stiffening agent for textiles made from natural, synthetic and mineralogical fibres.

finishing starch for the textile industry, cold water soluble Product description: • Base: potato starch • Modification: starch ether – propoxylated • Solubility: cold water soluble • Appearance: white flakes Applications: • AMITROLIT 8170 is used alone or in a mix with synthetic products as a sizing agent for cotton, rayon, linen, blended yarns and yarns made from synthetic fibres. • AMITROLIT 8170 is used in the textile industry as a filler and as a stiffening agent for textiles out of natural, synthetic and mineralogical fibres. • Adhesive for textiles at the printing.

sizing starch for the textile industry, cold water soluble Product description: • Base: potato starch • Modification: starch ester – phosphorated • Solubility: cold water soluble • Appearance: cream coloured, granular product Application: • AMITROLIT 8923 is used in the textile industry as a sizing agent for cotton, rayon, linen, blended yarns and yarns made from synthetic fibres. • AMITROLIT 8923 is used in the textile industry as a filler and as a stiffening agent for textiles made from natural, synthetic and mineralogical fibres.

sizing starch for the textile industry, cold water soluble Product description: • Base: potato starch • Modification: starch ether – propoxylated • Solubility: cold water soluble • Appearance: white flakes Application: • AMITROLIT 8160 is used in the textile industry as a sizing agent for cotton, rayon, linen, blended yarns and yarns made from synthetic fibres. • Adhesive for textiles at the printing.

sizing starch for the textile industry, cold water soluble Product description: • Base: potato starch • Modification: starch ether – propoxylated • Solubility: cold water soluble • Appearance: white flakes Application: • AMITROLIT 8165 is used in the textile industry as a sizing agent for cotton, rayon, linen, blended yarns and yarns made from synthetic fibres. • Adhesive for textiles at the printing.

corrugating starch for the paper industry Product description: • A special glue made from corn starch for use in the corrugated industry. • AMITROL 8516 is called a „one bag glue" which means a ready made compound containing the „carrier" as well as the required chemicals. • Appearance: white powder • Odour: specific Application: • AMITROL 8516 is simply poured into water under stirring and yields a ready for use glue. There is no need to prepare separately first a primary and then a secondary carrier. • A mixing ratio 1:3,0 is recommended; it also can be mixed 1:2,8 - 1:3,5.

CLASSICO - der Ursprüngliche, ist ein beliebter Bodenbelag, der vielseitig einsetzbar und in verschiedenen Anwendungsbereichen überzeugt. Ob auf Produktionsflächen in der Industrie und Lebensmittelbranche, Lagerflächen oder Logistikflächen - CLASSICO ist die optimale Lösung. Die große Farbpalette von CLASSICO ermöglicht eine individuelle Gestaltung und passt sich den unterschiedlichsten Raumkonzepten perfekt an. Zudem punktet dieser Bodenbelag mit einer hohen Chemikalienbeständigkeit, dies eignet ihn besonders für Räumlichkeiten, in denen mit aggressiven Substanzen gearbeitet wird. CLASSICO bietet zudem die Möglichkeit der elektrostatischen Leitfähigkeit. Gerade in Bereichen, in denen sensible elektronische Geräte eingesetzt werden, ist dies von besonderer Bedeutung. Die einfache Reinigung von CLASSICO ist besonders hervorzuheben. Verschmutzungen lassen sich mühelos entfernen, sodass der Bodenbelag stets hygienisch sauber bleibt. Zusätzlich ist CLASSICO äußerst strapazierfähig, sodass er den täglichen Belastungen in stark frequentierten Bereichen standhält. Vertrauen Sie auf CLASSICO - den perfekten Bodenbelag für höchste Hygieneansprüche. ANWENDUNGSBEREICHE: • INDUSTRIE • LAGERFLÄCHEN • LOGISTIKFLÄCHEN • PRODUKTIONSFLÄCHEN INDUSTRIE & LEBENSMITTEL VORTEILE: • GROSSE FARBVIELFALT • HOHE CHEMIKALIENBESTÄNDIGKEIT • EINFACH ZU REINIGEN • STRAPAZIERFÄHIG • HYGIENISCH

PEEK ist ein Hochleistungs-Kunststoff mit Eigenschaften, die mit bestimmten Metallen vergleichbar sind. Es ist bis zu 70 % leichter als Metall und dennoch äußerst robust. Mit extremer Hitzebeständigkeit, Biokompatibilität und Chemikalienresistenz eignet sich PEEK ideal für anspruchsvolle Anwendungen in der Luft- und Raumfahrt, Automobilindustrie und Medizintechnik. Seine Hydrolysebeständigkeit macht es zudem für Hochtemperaturanwendungen geeignet. Eigenschaften und Vorteile: Hitzebeständigkeit: Extrem beständig gegen hohe Temperaturen. Biokompatibel: Geeignet für medizinische Anwendungen. Chemikalienresistenz: Widersteht den meisten organischen und anorganischen Chemikalien. Leicht: Bis zu 70 % leichter als Metall mit ähnlicher Stabilität. Mechanische Festigkeit: Hervorragende Stabilität und Haltbarkeit. Anwendungsvielfalt: Von der Luftfahrt bis zur Medizintechnik einsetzbar.

(Farbe: blau) Gleichwertig zu Glysantin G48. Auf Basis von Silikat, Borat und Salzen organischer Säuren (auch für Aluminiummotoren). Enthält kein Nitrit, Amin und Phosphat, was zur besseren Umweltverträglichkeit beiträgt. Das Konzentrat hat folgendes Mischungsverhältnis: 40% bzw. 5 Liter Wasser : 2 Liter Kühlerfrostschutz für Temperaturen von -29°C 33% bzw. 3 Liter Wasser : 1 Liter Kühlerfrostschutz für Temperaturen von -20°C Spezifikationen: BMW LC-87, Deutz CA-14, Lamborghini-Tractors, Liebherr LH-00-COL3A, MAN 324 NF, MB 325.0, TL 774-C BMW"

thermoplastic starch Product description: Thermoplastic starch AMITROPLAST® 8935 is made from renewable, non-genetically-modified raw materials and is furthermore degradable. • Base: corn starch • Appearance: slightly yellowish granules • Odor: characteristic Application: • AMITROPLAST® 8935 is a blend component made from modified thermoplastic starch, which is specifically tailored to the requirements of injection molding. • AMITROPLAST® 8935 is compoundable with other plastics in order to obtain materials with mechanical and physical properties appropriate for specific applications.

adhesive for the paper industry Product description: • COLLABOND 8017 IQ is a cold water soluble corn starch with reduced surface tension. • Chemical base: corn starch • Solubility: soluble in cold water • Appearance: white to slightly yellowish powder • Odour: specific Applications: • COLLABOND 8017 IQ was especially developed for the gluing of paper bags on high-speed engines. The product is characterized by the good adhesiveness and short-structured performance. This short-structured performance assures a low-splatter application of glue. • COLLABOND 8017 IQ can be used in a ratio of 1 : 5 (starch : water). The fine-grained starch granules get completely dissolved. Depending on type and speed of the agitator the glue needs 45 – 60 min to be ready for use. COLLABOND 8017 IQ shows thixotropic behaviour during storage. For better flow ability the glue should be agitated slowly during storage.